The UP 7DSP is the most powerful MATCH DSP amplifier and comprises our new ADEP.3 circuitry. It offers seven amplifier channels in total as well as an additional preamp output, which allows – in combination with its integrated 8-channel DSP – to perfectly drive individual and complex speaker configurations. Two of the output channels deliver 160 Watts RMS into 2 Ohms – plenty enough for fuelling even large subwoofers. <br>
<br>
But brute force is nothing without ″smart control″ – that′s why the UP 7DSP incorporates a stunning powerful 64 Bit DSP of the latest generation, which enables to realize all-new revolutionary and proprietary sound features like the “Augmented Bass Processing”, the “StageXpander” or the “RealCenter” function. Take us by our word – you will experience a truly breathtaking sound performance.<br>
<br>
But that′s not enough – simply enjoy music from your smartphone in unprecedented quality. The UP 7DSP comes up with a MATCH Extension Card slot (MEC) for additional input and output interfaces like e.g. our Bluetooth® Audio Streaming module or a High Resolution Audio USB sound card.<br>
<br>
If the 4 highlevel inputs of the UP 7DSP are not sufficient for your project, you are able to upgrade the amplifier with the MEC ANALOG IN module. This extends the amplifier with two additional analog input channels. This module allows to<br>
<br>
upgrade OEM premium sound systems which require 2 additional highlevel inputs with up to 30 Volts input sensitivity<br>
provide the amplifier with a lowlevel signal<br>
connect an additional analog signal source, such as a TV or smartphone<br>
Of course, the additional 2 highlevel inputs provide our proprietary ADEP.3-circuit, the Auto Remote function as well as an adjustable input sensitivity from 1.5 to 30 Volts. Just like the highlevel input the 3.5 mm lowlevel stereo input offers an adjustable sensitivity. The adjustment range is from 0.5 to 8 Volts.<br>
<br>
Thanks to our professional and user-friendly DSP PC-Tool software V4 the configuration and set-up of the UP 7DSP is pretty straightforward and intuitive.

TECHNICAL DATA

Included pig-tail cable harness for universal installations

Output power RMS / max.
– @ 4 Ohms5 x 65 / 130 Watts (Front / Rear / Center channels)
– Subwoofer output @ 2 Ohms2 x 160 / 320 Watts
Amplifier technologyClass HD

4 x Highlevel speaker input
1 x Optical SPDIF (12 – 96 kHz)
1 x MEC
1 x Remote In
Input sensitivityHighlevel 2.0 – 8.3 Volts
Input impedance highlevel13 Ohms

7 x Speaker output
1 x RCA output
2 x Remote Out
Output voltage RCA3 Volts RMS

Frequency response20 Hz – 22,000 Hz
DSP resolution64 Bit
DSP power295 MHz (1.2 billion MAC operations/second)
Sampling rate48 kHz
DSP typeAudio signal processor
A/D-converters: BurrBrown
D/A-converters: BurrBrown
Signal-to-noise ratio digital input105 dB (A-weighted)
Signal-to-noise ratio analog input103 dB (A-weighted)
Distortion (THD) 0.03 %
Damping factor 100
Operating voltage10.5 – 16 Volts (max. 5 sec. down to 6 Volts)
Current draw450 mA
Max. remote output current500 mA

Fuses2 x 25 A LP-Mini-fuse (APS)
Class HD technology with dynamically controlled
power supply
ADEP.3 circuit
Start-Stop capability
Control Input ( URC, Director )
USB ( for PC control only )
MEC slot
Auto Remote switch
Galvanically isolated Line Out

Dimensions (H x W x D)46 x 130 x 153 mm.