GENTLY TILTED CABINET FRONT

The Diva 3 model is a loudspeaker with a cabinet consisting of two parts made of MDF board. The first part is a 25 mm thick front panel, increasing the mechanical stability of the cabinet and preventing unwanted resonances, thereby improving sound clarity. There is a bass reflex port on the front, allowing the speaker to be placed close to the wall. The set includes a foam plug that helps control low-frequency level and lets users adjust the sound to their preferences. The front is slightly tilted back, shallower at the bottom and deeper at the top of the column. The attractive design is highlighted by the magnetically attached, acoustically transparent grille.

MIDWOOFER WITH CURV MEMBRANE

The 15 cm low-midrange driver in the 2-way Diva 3 loudspeaker boasts a membrane made of Curv material (polypropylene composite), delivering natural sound with precisely processed low frequencies. It’s worth noting that these membranes are produced exclusively for Indiana Line on special order.

UPPER MEMBRANE SUSPENSION – DUAL-WAVE

The low-midrange driver in the Indiana Line Diva 3 loudspeaker features a precisely designed Dual-Wave surround, which expands the range of the loudspeaker’s linear operation. This reduction in distortion, including intermodulation distortion, translates into improved articulation across the entire range, from low bass to the midrange of the acoustic band. This improvement is noticeable in the sound of a wide range of instruments, especially percussion, stringed instruments, and acoustic instruments. The Dual-Wave suspension also reduces uneven frequency response resulting from resonances on the edge of the midwoofer’s membrane. Moreover, the Dual-Wave suspension has an exceptionally aesthetic appearance, reminiscent of professional stage equipment that employ so-called accordion suspension.

COMPUTER-OPTIMIZED CROSSOVER

The speaker crossover for the Diva 3 model has been computer-optimized. Thanks to this, it was possible to predict and verify the behavior of this important speaker component before creating the physical crossover. Its simple yet unique topology was specifically chosen for the Diva 3 model and the electro-acoustic transducers used, and it underwent many hours of listening tests to confirm the achieved effects. The result is a balanced frequency response, low distortion, and minimal power losses. Proper adjustment of parameters, with a minimum impedance of 4 ohms, means that the loudspeaker can work with virtually any amplifier. The tweeter filter section exclusively employs air coils and foil capacitors, eliminating unwanted distortions that often occur with electrolytic capacitors or ferrite core coils.