549.00 vnt
people are viewing this right now

Ausinių stiprintuvas.

Liko vnt.

    Image Safe Checkout
    Garantuotas saugus apmokėjimas
    • PREKIŲ PRISTATYMAS LIETUVOJE PER 2 - 3 D.D. Shipping & Return

    Fully balanced high end headphone amplifier

    Head Box DS2 B – High end balanced headphone amplifier

    The market for HiFi headphones has been expanding rapidly in the last years. There have been brought out new models and new driver designs. These headphones are able to produce outstanding sound, the amplifiers from which they are fed mostly are mediocre. For example planarmagnetic headphones demand more current and simply need more power to be driven to their full potential. Our new Head Box DS2 B will drive anything with ease as it puts out powerful 1100 mW into 33 Ohm. It has three different current settings to match any headphone type and features four gain settings for high impedance headphones as well as sensitive in ear monitors. The fully balanced dual mono design is completed with a phase inverter to convert any unbalanced signal to a balanced one straight at the input. A balanced 4 Pin XLR output on the front guarantees perfect signal transmission to your headphone. The highly acclaimed Texas Instruments TPA6120A2 chip has been implemented for best possible power handling, which results in superior sound and a near dead silent noise floor. Both outputs on the front can be used simultaneously for shared listening experiences.

    The Head Box DS2 B is able to adjust to every headphone in your collection: hard to drive dynamics, current hungry planarmagnetics and sensitive in ear monitors! Pure pleasure out of one box.


    Technical Specifications

    Output power 2 x 550 mW (in 33 Ohms, both channels driven)
    SNR 98 dB (A weighted, full output)
    THD +N < 0.02%
    Gain (unbalanced) 0, 3, 9,12 dB (no load)
    Gain (balanced) 6, 9, 15, 18 dB (no load)
    Frequency response 20 Hz – 20 kHz (+/- 0.2 dB)
    Analogue Inputs 1 pair RCA/Cinch
    1 pair XLR
    Headphone output 1 x 6.3 mm (unbalanced)
    1 x 4 Pin XLR (balanced)
    Analogue loop outputs 1 pair RCA/Cinch
    1 pair XLR
    Recommended headphone impedances 8 – 600 Ohms
    Trigger in/out 12 V
    Power supply 18 V / 1A DC
    Standby power consumption < 0.5 W
    Dimensions W x H x D 206 x 71 x 218 mm (Alu)
    240 x 72 x 218 mm (Wood)
    Weight 1461 g (Alu) without power supply
    1940 g (Wood) without power supply

    Dėl Jus dominančios prekės pristatymo, kreipkitės info@ arba telefonu +370 600 47347.

    Dėl Jus dominančios prekės pristatymo, kreipkitės info@ arba telefonu +370 600 47347.