Soundservice

KLIPSCHORN La Scala AL5 American Walnut

13,999.00 pora
people are viewing this right now

Grindinės kolonėlės.

Liko vnt.





    Image Safe Checkout
    Garantuotas saugus apmokėjimas
    • NEMOKAMAS PRISTATYMAS LIETUVOJE UŽSAKIUS VIRŠ 99 EUR
    • PREKIŲ PRISTATYMAS LIETUVOJE PER 2 - 3 D.D. Shipping & Return

    NEODYMIUM TWEETER
    The La Scala features a neodymium tweeter with a 1” polyimide diaphragm and
    copper clad aluminum voice coil. This lightweight diaphragm assembly and high
    strength magnet structure creates the tweeter’s high 105dB sensitivity and makes
    it the most efficient consumer tweeter in the market. When coupled to a 90° x
    40° Tractrix® horn, the tweeter sets new levels of performance for dynamic range
    and output.
    MIDRANGE
    According to Paul W. Klipsch, “the midrange is where we live” and is one of the
    most critical parts in any loudspeaker design. The La Scala’s midrange utilizes
    a 2” compression driver mated to a high efficiency exponential horn that
    maximizes the system’s power and performance. As a result, less distortion is
    produced by the amplifier and by the loudspeaker. That means clarity, accuracy
    and remarkable tonal definition.
    BI-AMP INPUT PANEL AND BINDING POSTS
    The La Scala’s premium, aluminum input panel accommodates large, high-quality
    speaker cables. Strong, versatile and quality binding posts provide the capability
    for bi-wiring or bi-amping. The quality continues with AudioQuest Type 4 with
    Star-Quad Geometry internal wiring featuring carbon-loaded insulation, nitrogeninjected PE and solid long-grain copper conductors.
    All specifications are subject to change without notice. ©2018 Klipsch Group, Inc. Klipsch and Tractrix are registered trademarks of Klipsch Group, Inc. A wholly-owned subsidiary of Voxx International Corporation. LA SCALA SPEC SHEET | V01 | 180918
    3502 WOODVIEW TRACE INDIANAPOLIS, IN 46268 | KLIPSCH.COM 2 OF 2
    FEATURES
    BOOK-MATCHED WOOD VENEER
    Klipsch only uses book-matched wood veneers for the Heritage series. The
    veneer leaves are kept in order as they are delicately sliced from the timber and
    precisely arranged to provide a mirror image at the splice joint — like turning
    the pages of a book. This gives each speaker an aesthetically appealing and
    consistent appearance that is treasured more than any other cut of wood veneer
    The LF and HF cabinets are also matched for continuous grain and color from top
    to bottom.
    MATCHED PAIRS
    Each pair of Heritage series loudspeakers is grain-matched, using wood veneer
    panels that come from the same timber. Each cabinet is carefully matched so
    that each speaker in the pair is practically indistinguishable from the other.
    The speakers move seamlessly together through the factory, and each finished
    product is inspected and labeled with sequential serial numbers, ensuring that
    your Heritage series speaker leaves the factory as a meticulously crafted set.
    BUILT TO LAST
    While each and every component of the La Scala is built to last, Klipsch has
    always recognized the unique and critical role of a loudspeaker’s cabinet in the
    sound reproduction process. From the craftsmen in Hope, AR to the engineers in
    Indianapolis, Klipsch has always put an extraordinary emphasis on cabinet design.
    The La Scala enclosure is assembled using only the highest-grade adhesives and
    fasteners. This is a speaker you will hand down from generation to generation.

     

    Specifikacija:

    FREQUENCY RESPONSE (+/- 4 dB) 51Hz – 20kHz
    SENSITIVITY1 105dB @ 2.83V / 1m
    POWER HANDLING 100W / 400W
    MAXIMUM SPL 121dB
    NOMINAL IMPEDANCE 8 ohms compatible
    CROSSOVER FREQUENCY HF: 4500Hz
    MF: 450Hz
    TWEETER
    K-771 1″ (2.54cm) Light-Weight Polyimide
    Diaphragm Compression Driver Mated to
    a 90° x 40° Tractrix Horn
    HIGH FREQUENCY HORN Tractrix
    MIDRANGE K-55-X 2” (5.08cm) Phenolic diaphragm
    compression driver
    MID-FREQUENCY HORN Exponential
    WOOFER K-33-E 15” (38.1cm) Fiber-composite cone
    with a folded horn
    ENCLOSURE MATERIAL Birch plywood and MDF
    ENCLOSURE TYPE Fully horn-loaded
    HEIGHT INCHES (MM) 40” (101.6 cm)
    WIDTH INCHES (MM) 24 1/4” (61.59 cm)
    DEPTH INCHES (MM) 25 5/16” (64.29 cm)
    PRODUCT WEIGHT LBS (KG) 201 lbs (91 kg)
    FINISHES Natural Cherry, Satin Black Ash and
    American Walnut
    GRILLE CLOTH Silver Metallic
    BUILT FROM 2018

    Dėl Jus dominančios prekės pristatymo, kreipkitės info@185.80.130.49 arba telefonu +370 600 47347.

    Dėl Jus dominančios prekės pristatymo, kreipkitės info@185.80.130.49 arba telefonu +370 600 47347.