Mano palyginimai (0)

Mano palyginimai

Uždaryti
Vaizdo ir garso įranga automobiliams
DrARTEX Quatro
Kaina: 11.99 €
41.40 Lt
Aprašymas
Kaina už 1 vnt.
Lapo dydis - 50 x 75 cm
 
 
DrARTEX Quatro – Sheet thickness 4.0mm
 
Description
This is a radically new product in the market. Based on our research and testing, we have found out that a traditional increase in thickness of the composite layer is less effective than sticking two layers together. What we have done with this material is exactly that – a sandwich consisting of a selfadhesive glue layer composite with aluminum foil followed by another layer of composite and aluminum.
 
Application: Boot lid, wheel arches, firewall and floor
 
Composition
A five-layered material:
1. Self adhesive glue layer for installation, protected with antiadhesive paper
2. Our advanced formula composite butyl polymer
3. Tempered aluminium foil
4. Our advanced formula composite butyl polymer
5. Tempered aluminium foil
 
MATERIAL DATA SHEET
Material Thickness (mm): 3.8+-5%; GOST 17073-71
Foil (Outer) Thickness (µm): 90+-10%
Foil (Inner) Thickness (µm): 60+-10%
Mass per m² (kg): 5.5+-10%; GOST 17073-71
Mechanical Loss Factor on metal plate with thickness 1mm at temperature less than +20ºС (): >0.54; ISO 6721-3:1994
Fire risk, burning rate (mm/min): Non-flammable, <100 ISO 3795-76
Durability of connection between the material and the metal surface during flaking-off (N/cm): >6; ISO 813:2010
 
COMPOSITION
High quality multilayer material, which combines several layers of aluminium foil, high and ultralight mastic composition with improved adhesion layer, is the ultimate solution for combating the vibration problem in wide frequency and temperature ranges. It also comes in handy when dealing with elevated
temperatures.
The material consists of two layers of aluminum foil with ultralight mastic composition between them, as well as the main mastic composition with improved adhesion qualities.
 
APPLICATION
This material should installed on clean, dry surfaces, including on complex surfaces. (WARNING: Not to be installed on corroded metal surfaces!). First clean the surface from dirt, it is recommended to use water with neutral detergents, which do not contain organic solvents and alkali. After surface dries, degrease it with white spirit, gasoline or other solvents and allow dry completely.
Peel off the anti-adhesive paper and thoroughly press against the surface, avoiding the formation of air bubbles between the surface and the material. Roll the material with a roller, pressing it through so that there is no air trapped between the material and the surface (use the "from the center to the edge"
technique ). It is best to apply the material in working environments with temperatures between +18 and +35°С.

Panašios prekės

DrARTEX Pallium
Kaina:
24.49 €
DrARTEX Lite
Kaina:
9.49 €
DrARTEX 199dB Drag
Kaina:
42.99 €
DrARTEX Gold HD
Kaina:
15.49 €
DrARTEX Mantle
Kaina:
19.99 €
DrARTEX Iridium
Kaina:
11.99 €
DrARTEX Armor
Kaina:
13.99 €
Klauskite
Vardas, Pavardė:
El. pašto adresas:
Telefono nr.:
Klausimas:

Įveskite skaičius:
Siųsti Atšaukti