Mano palyginimai (0)

Mano palyginimai

Uždaryti
Vaizdo ir garso įranga automobiliams
DrARTEX Iridium
Kaina: 11.99 €
41.40 Lt
Aprašymas
Kaina už 1 vnt.
Lapo dydis - 50 x 75 cm
 
 
DrARTEX Iridium – Sheet thickness 2.0mm
 
Description
Our updated range of vibration damping materials which no longer include any bitumen additives to remove the unpleasant smell and giving extra flexibility and ease of installation as well as adding to tighter adhesion, increasing the effectiveness of the materials. These products prevent corrosion of the surfaces, protecting the car frame for the long term.
 
Application: Iridium – Doors, roof, boot lid and bonnet lid
 
Composition
A three-layered material:
1. Self-adhesive glue layer for installation, protected with anti-adhesive paper
2. Our advanced formula composite butyl polymer
3. Aluminum foil
 
MATERIAL DATA SHEET
Material Thickness (mm): 2+-5%; GOST 17073-71
Foil (Outer) Thickness (µm): 60+-10%; GOST 17073-71
Mass per m² (kg): 2.9+-10%
Mechanical Loss Factor on metal plate with thickness 1mm at temperature less than +20ºС (): >0.22; DIN EN ISO 6721- 3:1994 (method-А)
Fire risk, burning rate (mm/min): ISO 3795-76
Durability of connection between the material and the metal surface during
flaking-off (N/cm): >5; ISO 813:2010
 
PROPERTIES
The material has excellent flexibility what allows to use it on different surfaces while providing the highest vibration damping properties. The material is waterproof and insures good defence against corrosion preventing any water and oxygen from coming in contact with chassis.
 
APPLICATION
This material should installed on clean, dry surfaces, including on complex surfaces. (WARNING: Not to be installed on corroded metal surfaces!). First clean the surface from dirt, it is recommended to use water with neutral detergents, which do not contain organic solvents and alkali. After surface dries, degrease it with white spirit, gasoline or other solvents and allow dry completely.
Peel off the anti-adhesive paper and thoroughly press against the surface, avoiding the formation of air bubbles between the surface and the material. Roll the material with a roller, pressing it through so that there is no air trapped between the material and the surface (use the "from the center to the edge"
technique ). It is best to apply the material in working environments with temperatures between +18 and +35°С.

Panašios prekės

DrARTEX Mantle
Kaina:
19.99 €
DrARTEX Armor
Kaina:
13.99 €
DrARTEX Lite
Kaina:
9.49 €
DrARTEX Quatro
Kaina:
11.99 €
DrARTEX Pallium
Kaina:
24.49 €
DrARTEX 199dB Drag
Kaina:
42.99 €
DrARTEX Gold HD
Kaina:
15.49 €
Klauskite
Vardas, Pavardė:
El. pašto adresas:
Telefono nr.:
Klausimas:

Įveskite skaičius:
Siųsti Atšaukti