Mano palyginimai (0)

Mano palyginimai

Uždaryti
Vaizdo ir garso įranga automobiliams
DrARTEX Armor
Kaina: 13.99 €
48.30 Lt
Aprašymas
DrARTEX Armor – 4mm 
 
Description
This is a radically new product to the market. Based on our research and testing we have found out that a traditional increase in the thickness of the composite layer is less effective than sticking two layers together. What we have done with this material is exactly that – a sandwich consisting of a self – adhesive glue layer composite with aluminium foil followed by another layer of composite and aluminium.
This product is using our advanced super light butyl polymer that is 38% lighter than traditional materials and a tempered aluminium foil that produces higher damping coefficient making this an ultimate product.
 
Application
Boot lid, wheel arches, firewall and floor.
 
Composition
A five-layered material:
1. Self adhesive glue layer for installation, protected with antiadhesive paper
2. Our space age formula composite butyl polymer
3. Tempered aluminium foil
4. Our space age formula composite butyl polymer
5. Tempered aluminium foil
 
MATERIAL DATA SHEET
Material Thickness (mm): 4+-5%
Foil (Outer) Thickness (µm): 120+-10%
Foil (Inner) Thickness (µm): 60+-10%
Mass per m² (kg): 5.6 GOST 
Mechanical Loss Factor on metal plate with thickness 1mm at temperature less than +20ºС (): >0.6 
Fire risk, burning rate (mm/min): Non-flammable, <100 
Durability of connection between the material and the metal surface during flaking-off (N/cm) >6 ISO  
 
APPLICATION
This material should installed on clean, dry surfaces, including on complex surfaces. (WARNING: Not to be installed on corroded metal surfaces!). First clean the surface from dirt, it is recommended to use water with neutral detergents, which do not contain organic solvents and alkali. After surface dries,
degrease it with white spirit, gasoline or other solvents and allow dry completely.
Peel off the anti-adhesive paper and thoroughly press against the surface, avoiding the formation of air bubbles between the surface and the material. Roll the material with a roller, pressing it through so that there is no air trapped between the material and the surface (use the "from the center to the edge"
technique ). It is best to apply the material in working environments with temperatures between +18 and +35°С.
 
Kaina už 1 vnt.
1 lapo dydis - 50 x 27,5 cm

 

Panašios prekės

DrARTEX Gold HD
Kaina:
15.49 €
DrARTEX 199dB Drag
Kaina:
42.99 €
DrARTEX Iridium
Kaina:
11.99 €
DrARTEX Mantle
Kaina:
19.99 €
DrARTEX Pallium
Kaina:
24.49 €
DrARTEX Quatro
Kaina:
11.99 €
DrARTEX Lite
Kaina:
9.49 €
Klauskite
Vardas, Pavardė:
El. pašto adresas:
Telefono nr.:
Klausimas:

Įveskite skaičius:
Siųsti Atšaukti