Mano palyginimai (0)

Mano palyginimai

Uždaryti
Vaizdo ir garso įranga automobiliams
DrARTEX 199dB Drag
Kaina: 42.99 €
148.44 Lt
Aprašymas
DrARTEX 199dB Drag - 6.0mm thick, extra powerful vibration damper
 
Description
If you are going for any sound competitions like DBDrag, SQL, EMMA, etc or just building a very high end audiophile car – this material is designed especially for you.
It is made up of multiple successive layers, each with a different function and a total thickness of 6mm. It provides incredible vibration damping factor and will drastically improve frame’s rigidity.
This material is going to take you where no other can in a competition.
 
Application: Wheel arches, Trunk , Floor, Bulkhead
 
Composition
A five-layered material:
1. Self adhesive glue layer for installation, protected with antiadhesive paper
2. Our space age formula composite butyl polymer
3. Tempered aluminium foil
4. Our space age formula composite butyl polymer
5. Tempered aluminium foil
 
MATERIAL DATA SHEET
Material Thickness (mm): 6+-5%  
Foil (Outer) Thickness (µm): 90+-10%  
Foil (Inner) Thickness (µm): 60+-10%  
Mass per m² (kg): 9.3+-10%
Mechanical Loss Factor on metal plate with thickness 1mm at temperature less than +20ºС (): 0.61  
Fire risk, burning rate (mm/min): Non-flammable, <100  
Durability of connection between the material and the metal surface during flaking-off (N/cm) >7.2  
 
APPLICATION
This material should installed on clean, dry surfaces, including on complex surfaces. (WARNING: Not to be installed on corroded metal surfaces!). First clean the surface from dirt, it is recommended to use water with neutral detergents, which do not contain organic solvents and alkali. After surface dries, degrease it with white spirit, gasoline or other solvents and allow dry completely.
Peel off the anti-adhesive paper and thoroughly press against the surface, avoiding the formation of air bubbles between the surface and the material. Roll the material with a roller, pressing it through so that there is no air trapped between the material and the surface (use the "from the center to the edge" technique ). It is best to apply the material in working environments with temperatures between +18 and +35°С.
 
Kaina už 1 vnt.
1 lapo dydis - 50 x 75 cm
 

Panašios prekės

DrARTEX Quatro
Kaina:
11.99 €
DrARTEX Armor
Kaina:
13.99 €
DrARTEX Gold HD
Kaina:
15.49 €
DrARTEX Iridium
Kaina:
11.99 €
DrARTEX Mantle
Kaina:
19.99 €
DrARTEX Lite
Kaina:
9.49 €
DrARTEX Pallium
Kaina:
24.49 €
Klauskite
Vardas, Pavardė:
El. pašto adresas:
Telefono nr.:
Klausimas:

Įveskite skaičius:
Siųsti Atšaukti