Mano palyginimai (0)

Mano palyginimai

Vaizdo ir garso įranga automobiliams
Kaina: 329.00 €
1,135.97 Lt
Mono Power Amplifier with remote control - MRV-M1200
Tens of thousands have relied on V-Power amplifiers for dependable, quality power. Now in their fourth generation, V-Power amplifiers carry on this heritage and prove that playing strong never looked our sounded better. Yes, it is possible to improve upon a good thing.
Product information
Proven Power
Each V-Power amplifier comes with its very own birth-sheet. V-Power amplifiers are tested and documented to show their true actual output.
Raising the Bar
The new V-Power products are now Class D digital amplifiers, resulting in a huge efficiency gain versus their predecessors without draining your battery or your pockets. Class-D provides continuous clean power to your speakers, operating at 80% efficiency far greater than conventional Class A or B amplifiers. Translation: Enjoy cleaner bass, even during extreme power demands.
Big Power, Small Package
V-Power amplifiers are known for their compact size, but don’t underestimate their power capacity. Although they have a 40% smaller footprint than their predecessors, they produce the same amount of power as before. Get the power you need, even if you have limited installation space.
Non Shut-Down Design
Even if you pound your music for a long time, these amps won’t shut down. They use a Thermal Management Processor to make sure the heat level never gets too high. No distortion, no interruptions!
Dual Feedback Modulation
Dual internal error correction technology – which had previously only been available in the PDX and X-Power amplifiers, is now integrated in V-Power mono amplifiers. The audio input signal is analysed, compared, and corrected twice dynamically as the signal is processed through the amplifier. The result is amplifiers with the widest frequency response, higher damping factor, and lowest noise in its class.
Exceptionally Simple Sound Upgrade
The V-Power's 4-channel speaker level inputs connect directly to any head unit, without the need for external converters. This makes the V-Power amplifiers ideal for upgrading factory and aftermarket systems. The flush mount controls make for easy installation. The terminal covers conveniently snap-on without the need for additional tools, to protect the wiring connections while creating a clean, finished appearance.
Remote Bass Control included.
Use the Remote Bass Control (RUX-KNOB) to conveniently adjust bass levels from your dash.
Terminal Layout: Two-Sided
Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals
Amplifier Type: Class-D (Digital)
Channel Design: 1 Channel (Mono)
Power Supply Design: DC-DC PWM Power Supply
Power Supply: MOSFET
Pre-Amp Stage: Discrete
Final Outputs: Power MOSFET
Crossover: Variable Lowpass Filter
Gain Control: Continuously Adjustable Gain Control
Bass EQ: Bass EQ Function
Bass Control:  Remote Bass Control (RUX-KNOB) included
Remote Turn On: Remote Sensing Function (for Speaker Level Input)
Low-impedance Possibility:
Current Protection: Over-Current, Over-Voltage, Under-Voltage and Thermal Protection
Board Circuitry: S.T.A.R. Circuit
RCA Output: Non-Fading Pre-Amp Output (4 Volts)
Speaker-Level Inputs: 4-channel Speaker Level Inputs
Power Indicator: Top Mounted Blue LED Power Indicator
Thermal Control: Multi-stage Power Limits
Max Power Output Ratings
Total Max Power: 2000W
RMS Power Ratings
Per channel into 4 Ohms: 600W RMS x 1 (14.4V at <1% THD+N)
Per channel into 2 Ohms: 1200W RMS x 1 (14.4V at <1% THD+N)
Sound Tuning
Crossover Frequency (LPF): 50 - 400 Hz, -24dB/oct.
EQ (Equalizer): 0 to +12dB, fc=50Hz
Foot Print (WxHxD) mm: 342 x 55 x 219 mm
Heat Sink (WxHxD) mm: 305 x 55 x 215 mm
Power Requirements: 14.4 V.DC (11-16V allowable)
Input Sensitivity (RCA Input): 0.15 - 4.0 V
Input Sensitivity (Speaker Level Input): 0.4 - 10 V
Input Impedance: >10k ohms
Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 10 -400 Hz
THD+N (10W into 4 Ohms): ≤ 1 %
THD+N (10W into 2 Ohms): ≤ 1 %
THD+N (Rated Power into 4 Ohms): ≤ 1 %
THD+N (Rated Power into 2 Ohms): ≤ 1 %
Damping Factor (10W into 4 Ohms at 100Hz): >750
Signal to Noise (1W into 4 Ohms): >85 dB
Signal to Noise (Rated Power into 4 Ohms): >107 dB
Preamp Output: 4.0V Max.
Remote Level: -20 to 0 dB
Weight: 4.16 kg

Panašios prekės

129 €
175 €
299 €
175 €
Vardas, Pavardė:
El. pašto adresas:
Telefono nr.:

Įveskite skaičius:
Siųsti Atšaukti